Technical Specifications

Packing Specifications

* The pickling paste is being used for the pickling of stainless steel welding seams. It removes annealing colors and welding cinders in the welding seam area. It is in the form of gel and used with proper pickling brush. After that it rinsed with water.

* The product is free of hydrochloric acid and has low chloride contents. Therefore, it does not cause yellowing and rusting on metal surface.

Technical Specifications

Packing Specifications

* After use of the passivation RP on stainless steel surface a passivation on layer is quicly formed. This procedure gives the material a corrosion protection. Use the passivating agent undilated. You can use it either as a bath, with a sprayer or a brush.

Technical Specifications

Packing Specifications

* Acid cleaning products for the cleaning of stainless steel. Removes contamination, traces of oil and grease as well as corrosion products (thin layer of rust). Visible brightening of material by deep cleaning. Surface cleaner can be applied either by spraying or dipping. The minimum application period for stainless steel should be 15 min.

Technical Specifications

Packing Specifications

* Pickling spray is used to restore stainless steel tank surfaces that have been damaged by working operations such as welding, forming, cutting and blasting. The pickling spray also removes welding oxides, the underlying chromium depleted layer, micro slag particles and other contaminants that may cause local corrosion. To assist pickling, this process may sometime to be combined with some form of simultaneous mechanical treatment, for example brushing.

* Recommended times of application approx. 30-90 min. depending on steel grade, contaminants and temperature. Rinse thoroughly with water afterwards. The best results are achieved by using a high pressure water jet. Do not use in direct sunlight or other heat sources. (It is used with 60 gr powder paint.) The paint will be lost after 15 minute it has been applied. The paint is added to relieve the surface that chemical applied.

Technical Specifications

Packing Specifications

* Short Arc: 60-140 Amper

* 18-22 Volt

* TS 5618 EN 440: G42 3 CM G 3Si 1

  AWS A 5.18: ER 70 S-6

* 15 Kg

Technical Specifications

Packing Specifications

* Short Arc: 80-175 Amper

* 18-24 Volt

* TS 5618 EN 440: G42 3 CM G 3Si 1

  AWS A 5.18: ER 70 S-6

* 15 Kg

Technical Specifications

Packing Specifications

* Short Arc: 120-200 Amper, 18-27 Volt

* Spray Arc: 150-280 Amper, 25-40 Volt

* TS 5618 EN 440: G42 3 CM G 3Si 1

  AWS A 5.18: ER 70 S-6

* 15 Kg

Technical Specifications

Packing Specifications

* 2.50 x 350 mm

* 60-100 A

* TS 563 EN 499: E42 0 RR 12
  DIN 1913 : E 51 32 RR 8
  AWS A5.1 : E6013

* Weld Metal Composition, Typical

  C: 0.08, Si: 0.30, Mn: 0.60

* Yield Strength : 430 N/mm²

* Tensile Strength :  510 N/mm²

* Elongation (L=5d) : 24 %

* Impact Value : 47 J (0 ⁰C)

* AC min 50 V ; DC (-)

* Redrying Temperature: 70-80 ⁰C / 1 hour

WELDING POSITIONS:

PROPERTIES and APPLICATIONS:
Heavily coated rutile electrode for welding of unalloyed constructional steels and carbon steels in all positions except vertical down. Easy to strike and restrike. Soft arc, easy slag removal. All kind of machine bodies, steel construction, steel furniture, shipyards, automotive industry, agriculture machines are main using areas

Technical Specifications

Packing Specifications

* 3.25 x 350 mm

* 90-140 A

* TS 563 EN 499: E42 0 RR 12
  DIN 1913 : E 51 32 RR 8
  AWS A5.1 : E6013

* Weld Metal Composition, Typical

  C: 0.08, Si: 0.30, Mn: 0.60

* Yield Strength : 430 N/mm²

* Tensile Strength :  510 N/mm²

* Elongation (L=5d) : 24 %

* Impact Value : 47 J (0 ⁰C)

* AC min 50 V ; DC (-)

* Redrying Temperature: 70-80 ⁰C / 1 hour

WELDING POSITIONS:

PROPERTIES and APPLICATIONS:
Heavily coated rutile electrode for welding of unalloyed constructional steels and carbon steels in all positions except vertical down. Easy to strike and restrike. Soft arc, easy slag removal. All kind of machine bodies, steel construction, steel furniture, shipyards, automotive industry, agriculture machines are main using areas

Technical Specifications

Packing Specifications

* 4.00 x 450 mm

* 160-190 A

* TS 563 EN 499: E42 0 RR 12
  DIN 1913 : E 51 32 RR 8
  AWS A5.1 : E6013

* Weld Metal Composition, Typical

  C: 0.08, Si: 0.30, Mn: 0.60

* Yield Strength : 430 N/mm²

* Tensile Strength :  510 N/mm²

* Elongation (L=5d) : 24 %

* Impact Value : 47 J (0 ⁰C)

* AC min 50 V ; DC (-)

* Redrying Temperature: 70-80 ⁰C / 1 hour

WELDING POSITIONS:

PROPERTIES and APPLICATIONS:
Heavily coated rutile electrode for welding of unalloyed constructional steels and carbon steels in all positions except vertical down. Easy to strike and restrike. Soft arc, easy slag removal. All kind of machine bodies, steel construction, steel furniture, shipyards, automotive industry, agriculture machines are main using areas

Technical Specifications

Packing Specifications

* 2.50 x 350 mm

* 80-115 A

* TS 563 EN 499: E42 3 B 42 H 10
  DIN 1913 : E 51 54 B 10
  AWS A5.1 : E7018

* Weld Metal Composition, Typical

  C: 0.08, Si: 0.50, Mn: 0.90

* Yield Strength : 430 N/mm²

* Tensile Strength :  510 N/mm²

* Elongation (L=5d) : 24 %

* Impact Value : 47 J (-30 ⁰C)

*  DC (+)

* Redrying Temperature: 300 ⁰C / 2 hour

WELDING POSITIONS:

PROPERTIES and APPLICATIONS:
Heavily coated basic type electrode for welding of unalloyed or low
alloyed constructional steels in all positions except vertical down.
Weld metal recovery is about 120 %. Suitable for welding in steel
construction, boiler making, ship building
and automotive industry.

Technical Specifications

Packing Specifications

* 3.25 x 350 mm

* 110-150 A

* TS 563 EN 499: E42 3 B 42 H 10
  DIN 1913 : E 51 54 B 10
  AWS A5.1 : E7018

* Weld Metal Composition, Typical

  C: 0.08, Si: 0.50, Mn: 0.90

* Yield Strength : 430 N/mm²

* Tensile Strength :  510 N/mm²

* Elongation (L=5d) : 24 %

* Impact Value : 47 J (-30 ⁰C)

*  DC (+)

* Redrying Temperature: 300 ⁰C / 2 hour

WELDING POSITIONS:

PROPERTIES and APPLICATIONS:
Heavily coated basic type electrode for welding of unalloyed or low
alloyed constructional steels in all positions except vertical down.
Weld metal recovery is about 120 %. Suitable for welding in steel
construction, boiler making, ship building
and automotive industry.

Technical Specifications

Packing Specifications

* 4.00 x 450 mm

* 140-200 A

* TS 563 EN 499: E42 3 B 42 H 10
  DIN 1913 : E 51 54 B 10
  AWS A5.1 : E7018

* Weld Metal Composition, Typical

  C: 0.08, Si: 0.50, Mn: 0.90

* Yield Strength : 430 N/mm²

* Tensile Strength :  510 N/mm²

* Elongation (L=5d) : 24 %

* Impact Value : 47 J (-30 ⁰C)

*  DC (+)

* Redrying Temperature: 300 ⁰C / 2 hour

WELDING POSITIONS:

PROPERTIES and APPLICATIONS:
Heavily coated basic type electrode for welding of unalloyed or low
alloyed constructional steels in all positions except vertical down.
Weld metal recovery is about 120 %. Suitable for welding in steel
construction, boiler making, ship building
and automotive industry.